|
|
|
We bring you a
variable range of filters, some of them
includes : |
|
Customized filtration systems
are necessary in industrial
environments. Citing this, we
manufacture quality Air Filters
that are available in different
thickness and configurations
Features & Benefits:
•High efficiency filtration with
chemical/corrosive resistance,
ideal for chemical plants, air
conditioning and ventilation
systems.
•3/5 layers of high density
polyethylene /polypropylene mesh
stitched and pleated to provide
maximum filtration area in the
space provided housed in a
metallic frame.
•Pleats are uniformly separated
by metallic spacers
•2-3 m/s
•4 mm. wg.
•16 mm. wg.
•82% (down to 10 micron)
We also make Panel Type Air
Filter that is available in
different thickness
configurations. It is best for
fine filter application in air
conditioning, ventilation
system, & booth. We offer
Pre-filters to Absolute Filters.
Specifications:
•Constructed from
woolen/synthetic felted media
stitched with wire mesh
reinforcement, pleated in deep
folds encased in metallic casing
and the folds will be separated
by metallic spacers.
•1.5 -2 m/s
•7-10mm of W.G.
•50 mm of W.G.
•95%-98% (down to 5 micron)
|
|
|
 |
| |
|
Air/Oil Separators
We bring you over 300 models of
air-oil separator elements that
are made using a cylindrical or
pleated design of micro glass
with a variety of flanges,
gaskets and kits. These are
available in 5,10, 25, 40,
60,100,150, 200 and above
Microns.
These separators have air flow
capacities of up to 3000 CFM /
element with 0.3- 10-micron
aerosol selectivity and up to
99.9% removal efficiency.
These elements work upto 225° F
operating temperature at 50 PSI
DP maximum differential
pressure.
A variation of these air-oil
separator elements are the Mist
Eliminator Elements which are
used for the elimination of ale
oil smoke and mist from
mechanical and rotary vacuum
pumps.
|
|
|
Oil & Lube Filters
We manufacture world-class
Oil and Lube Filters for
vehicular engines that are
engineered to hold more
contaminants, which allows
the engine to run longer.
Specifications:
•Resin impregnated
Cellulosic Paper Filter
media
•Depth Nominal Filtration
•Available in 5, 10, 25, 35
nominal micron ratings
|
|
|
Hydraulic Filters
We manufacture International
Standard Hydraulic Filters
in two varieties:
•Hydraulic Filter Elements
of Paper & Glass Fiber Media
•Hydraulic Filter Elements
of Stainless Steel Mesh
Media
Specifications:
•Resin impregnated
Cellulosic paper media
•Depth Nominal Filtration
•Available in 5, 10, 25, 35
nominal micron rating.
|
|
|
Stainless Steel Mesh
Media
We manufacture durable and
reliable Stainless Steel
Mesh Media. It is used to
make filter suction strainer
elements. Suction strainer
elements are intended to
protect hydraulic pumps
against catastrophic failure
caused by coarse
contaminants, hence, it is
essential that the vital raw
material (S.S. Mesh Media)
should have high tensile
strength & endurance.
Features :
•Range 5 to 500 micron
•Segregated Depth Filtration
– High Dirt Holding Capacity
•Available in 3, 5, 10,12,
20, 25 absolute micron
rating
|
|
|
Suction Strainers
We manufacture world-class
Suction Strainer. Our Filter
Suction Strainer Elements
are designed for
installation into suction
lines of pumps. Extra
caution should be taken to
ensure that the suction
elements are always mounted
below the minimum oil level
of the reservoir.
Our standard models have
nominal filtration ratings
of 74 or 125 microns. The
suction strainer elements
can also be supplied with a
bypass valve to reduce high
pressure drops caused by
contaminated elements or
high viscosity fluids during
cold starting. The bypass
valve opens at 3 psi. For
best results, suction
strainer elements are sized
for clean element pressure
drops off no higher than
0.5-.07 psi.
Specifications:
•Reusable SS 100 mesh / 149
micron std
•Aluminium die cast nut
•Steel cap / support tube
•Continuous epoxy bond
•Suitable for
hydraulic/mineral oil
•Maximum working temp. 80 °C
|
|
|
|
 |
|
|
